Peel & Seal™ 36″ x 33′
Original Peel & Seal Self-Stick Aluminum Roll Roofing. Peel & Seal is a multi Purpose weatherproofing material. Apply in fair weather at temperatures above 60 degrees. A minimum slope of 1/2″ per foot is required. Peel & Seal may be applied directly to roof decks including wood, metal, masonry and existing smooth asphalt roofs.
– Waterproof and weatherproof
– Sticks to most surfaces
– Aluminum surface reflects heat & reduces energy costs
– Low cost, labor saving, easy to handle
– Tough and durable, puncture and abrasion resistant
– Stretches to allow for building movement
– Requires no coating for exposure to sunlight
– For roofing, waterproofing, patching and repair and hundreds of other uses
INSTALLATION:
Peel & Seal is easily installed by removing the release paper and pressing the aluminized membrane into place. Peel & Seal can be cut to fit using scissors or a razor knife. Peel & Seal adheres to the deck and to itself when overlapped. When overlapping the product, 3″ side laps and 6″ end laps are required.